How To Change Low Pressure Power Steering Hose On Mercedes Benz

Mercedes-Benz Ability Steering Line Replacement

We had a 2001 Mercedes-Benz that had burned the ability steering pump. The problem, in fact, was that the machine was losing ability steering and needed to be topped off every calendar week.

Well, eventually, the power steering pump burned, and it needed to exist replaced.

While replacing the power steering pump, we noticed that there was a large leak in the high pressure line of the PS pump. Yous could see a stream of ability steering fluid as yous moved the steering cycle.

Below is a quick overview of how to modify the power steering line on a Mercedes-Benz E-Class, W210.

Instructions

Jack upward the vehicle and secure it with jack stands.
Bleed the power steering fluid from the reservoir. Yous will have to suck it out with a syringe or similar.
Remove the 17mm commodities at the power steering pump.
Get under the automobile to access the other end of the line. Y'all will exist right beneath the driver's footwell. Be conscientious considering at that place are two lines hither that go to the power steering rack. The bolts are very shut, and y'all may have off the wrosteering rack. The bolts are very close, and you may take off the wrong bolt.
Disconnect the wire harness if necessary to make more room.
Remove the bolt that secures the power steering line to the steering rack.
Install the new line in reverse lodge. Make certain you install the copper washers, or you will have a PS leak.
The commodities that connects to the PS pump has an O ring that needs to get dorsum on.
Summit off ability steering reservoir.