How To Change A Radiator In A 2000 Jeep Grand Cherokee
How to Replace the Radiator on a 1997 Jeep 1000 Cherokee
past Russell Forest
radiator sense of humour prototype by John Sfondilias from Fotolia.com
The radiator on a Jeep One thousand Cherokee tin take a lot of abuse, between driving off road and just cruising through the neighborhood. If the radiator gets a hole in it, then your engine won't cool efficiently, which could potentially harm it. The fix is to supervene upon the radiator. In this case, the project vehicle is a 1997 Jeep Grand Cherokee with the five.2l V8 engine, but the process is similar for other Jeep models.
Stride i
Allow the engine to absurd for three to five hours prior to working on the cooling arrangement. Open up the drain cap on the top of the radiator with your hand. Set a bleed pan underneath the radiator, and then open up the petcock on the bottom to permit the coolant to drain.
Step 2
Unbolt the grille reinforcement panel at the top of the radiator using the ratchet and set the panel to the side. Unscrew the hose clamps on the upper and lower radiator hoses at the radiator and pull the lines off of the radiator. Unscrew the transmission libation lines on the radiator using the line wrench set.
Step 3
Unplug the electric connections to the fan using your hands. Unbolt the radiator back up bolts using the ratchet, then pull the support away from the engine. Remove the radiator attaching bolts too, and so elevator the radiator up and abroad from the vehicle.
Step 4
Install the replacement radiator into the core support using your hands. Then reinstall the radiator attaching bolts, radiator support bolts and grille reinforcement console using the ratchet.
Reinstall the upper and lower radiator hoses using the flathead screwdriver. Plug in whatever electric connections using your easily. Then open up the cap on the radiator and fill it with the prediluted coolant. Plough on the engine and let information technology run for 10 minutes with the heater assault the high position. After ten minutes, turn off the car and allow it to cool downward for an 60 minutes. Open up the radiator cap when it'south absurd to the touch and add together coolant as necessary.
Things Y'all'll Need
- Drain pan
- Flathead screwdriver
- 3/eight-inch ratchet and socket set up
- Line wrench set
- Replacement radiator
- 50-fifty prediluted coolant
Warnings
- Never work on the cooling organization of a vehicle with a hot engine because yous risk burning yourself.
Author Bio
Russell Wood is a writer and photographer who attended Arizona Country University. He has been edifice custom cars and trucks since 1994, including several cover vehicles. In 2000 Wood started a career equally a writer, and since then he has dedicated his business organization to writing and photographing cars and trucks, as well every bit helping people learn more about how vehicles work.
More Articles
Source: https://itstillruns.com/replace-1997-jeep-grand-cherokee-5996456.html
Posted by: reesewousing.blogspot.com
0 Response to "How To Change A Radiator In A 2000 Jeep Grand Cherokee"
Post a Comment